Uniden BCD436HP User Manual page 41

2nd Line
S0-9: shows the first digit of the System quick key on the left with the blinking
second digit on the right.
a non-blinking number on the right indicates the quick key is enabled waiting to
be scanned.
a - (dash) means nothing is assign to the quick key.
an * (asterisk) means the quick key is disabled.
0-9: shows the Custom Search key status.
The Date is shown.
Receive Mode in Function Mode.
Volume Offset for the channel in Function Mode.
appears if Intermediate Exchange is enabled for the channel.
IFX
appears to show channel attenuation in Receiving or Hold Modes and in
ATT
Search Mode to show search attenuation.
appears if the channel is receiving digitalized voice
P25
in Receiving or Hold Modes.
appears when data is received on a voice channel
LNK
in Receiving or Hold Modes.
appears when data is received on a control channel
DAT
in Receiving or Hold Modes.
appears if the channel is receiving encrypted voice and is muted
ENC
in Receiving or Hold Modes.
appears if the Weather Alert Priority feature is on.
WX
shows the volume level for three seconds when you turn VOL.
V=NN
3rd Line – 3 Line Display Off
System Name and Avoid/Hold status in Receiving or Hold Modes.
Temporary Avoids appear reversed in the display-
Search with Scan appears to show a Custom Search in Scan Mode.
Custom Search Name in Search Mode.
A Look at the Display
.
35