Closing The Housing - Fronius Primo 3.0-1 Service Manual

Opening the housing
Closing the hous-

Closing the housing

ing
114
(5) (5) (6)
(1)
IMPORTANT! Do not exceed an opening
angle of 11°.
In the connection area, pull the inverter
5
forward out of the wall bracket, then lift
the inverter and remove it in an
upwards direction.
Loosen the four 5x18 mm TX25 screws
6
(5) with seal rings until the power stage
set cover (6) can be removed.
(5)(5)
Make sure that the 15 EMC springs (1)
1
are seated correctly.