Fronius Primo 3.0-1 Service Manual page 124

Replacing the left external fan:
(3)(4)
124
(1)
(2)
(1)
(2)
(5)
Carefully turn the inverter round
14
Fit the Molex plug (2)
15
Secure the cables in the clamping no-
16
ses
Disconnect the Molex plug (1)
1
Release the cables from the clamping
2
noses and feed them out
Turn the inverter carefully so that the
3
back is accessible
Remove the two 5x14 mm TX25
4
screws (3)
Release the fan holder (5) locking de-
5
vice (4) and open the holder
(4) (3)