Power; Poe; Regulatory Compliance - Illustra Flex 2MP PTZ 20x Indoor Quick Start Manual

Power

Power can be provided by PoE, PoE+ or by a 24 VAC power line.

PoE+

The camera uses power over Ethernet Plus and is compliant to POE IEEE 802.3at
of cable.
If you are using a switch, note that the switch will need to support 60 watt PoE+ to power the outdoor model of the
camera.
The indoor camera requires the use of 30 watt PoE.

Regulatory Compliance

The Illustra Flex PTZ Camera meets the following regulatory requirements:
Emissions
Immunity
Safety
Environmental
Vandal Resistant
Rating
22
Storage Temperature
Category
USA (FCC): CFR 47 Part 15
Canada: ICES-003/NMB-003 Issue 5
European Union: EN 55022:2010
European Union: EN 61000-3-2:2006/A2:2009
European Union: EN 61000-3-3:2008
Australia/New Zealand: AS/NZS CISPR 22:2009
EN50130-4:2011
CB Scheme: IEC 60950-1:2005/A1:2009
European Union: EN 60950-1:2006/ A11:2009 +
A1:2010 + A12:2011
USA: UL 60950-1:2007/A1:2011
d. Canada: CAN/CSA-C22.2 NO. 60950-1A-
07/A1:2011
Outdoor Housing: United States: UL 60950-22
Canada: CAN/CSA-C22.2 NO. 60950-22-07
Global: IEC 60529
Recessed housing:
United States: UL 2043
RoHS,
WEEE
IK10
-15°C to 65°C (5°F to 149°F)
Details.
Illustra Flex 2MP PTZ Quick Start Guide
TM
with up to 100m (300 feet)