Connecting The Camera - Illustra Flex 2MP PTZ 20x Indoor Quick Start Manual

No.
1 Alarm I/0
2 Reset Button
3 BNC
4 RJ-45
5 Power (AC 24V)
6 Audio I/0
7 microSD Card Slot
Note:
If you are using a switch, note that the switch will need to support 60 watt PoE+ to power the outdoor model of the
camera.
8
Indoor
Figure 8 Camera connectors
Connector
Alarm I/O connection
Press the button with one finger for at least 20 seconds to restore the
system
For analog video output
For network and PoE+ connections
Power connection
Audio I/O connection
Insert the microSD card into the card slot to store videos and snapshots.

Connecting the Camera

Outdoor
Definition
Illustra Flex 2MP PTZ Quick Start Guide
.