Replacing The Status-Light Board; Procedure; Post-Requisites - Dell Inspiron 15 7000 Gaming Service Manual

Replacing the status-light board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the screw holes on the status-light board with the screw holes on the
computer base.
2 Replace the screw (M2x3) that secures the status-light board to the computer
base.
3 Slide the status-light board cable into the connector on the status-light board
and close the latch to secure the cable.

Post-requisites

1 Replace the computer
2 Replace the rear
3 Replace the battery.
4 Replace the base
54
computer. After working inside your computer, follow
After working inside your
base.
cover.
cover.
computer. For more safety best
www.dell.com/
Before