Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
rear
4
Remove the
wireless
5
Remove the
computer
6
Remove the
display
7
Remove the
display
8
Remove the
display
Procedure
1
Using a plastic scribe, gently pry the camera from the display back-cover and
antenna assembly.
2
Open the latch and disconnect the camera cable from the camera.
114
computer. After working inside your computer, follow
After working inside your
cover.
cover.
card.
base.
assembly.
bezel.
panel.
computer. For more safety best
www.dell.com/
Before