13
Slide the status-light board cable into the connector on the system board and
close the latch to secure the cable.
14
Slide the hard-drive cable into the connector on the system board and close the
latch to secure the cable.
15 Connect the coin-cell battery to the system board.
Post-requisites
1
Replace the
computer
2
Replace the
wireless
3
Replace the
solid-state
4
Replace the
memory
5
Replace the
rear
6
Replace the
coin-cell
7
Replace the battery.
8
Replace the
base
Entering the Service Tag in the BIOS setup
program
1
Turn on or restart your computer.
2
Press F2 when the Dell logo is displayed to enter the BIOS setup program.
3
Navigate to the Main tab and enter the Service Tag in the Service Tag Input
field.
64
base.
card.
drive.
modules.
cover.
battery.
cover.