Removing the computer base
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
rear
4
Remove the
wireless
Procedure
1
Using pull tab, disconnect the camera cable from the system board.
2
Peel the camera cable off the computer base.
3
Remove the antenna cables from the routing guides on the computer base.
4
Remove the screw (M2x3) that secures the display-cable bracket to the
computer base.
5
Lift the display-cable bracket off the computer base.
6
Using the pull tab, disconnect the display-cable from the system board.
44
computer. After working inside your computer, follow
After working inside your
cover.
cover.
card.
computer. For more safety best
www.dell.com/
Before