Replacing The Computer Base; Procedure - Dell Inspiron 15 7000 Gaming Service Manual

Replacing the computer base

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Replace the speakers.
2 Replace the status-light
3 Replace the power-adapter
4 Replace the system
5 Align and place the palm-rest assembly on the computer base.
6 Press down the edges of the palm-rest assembly and snap it into place.
7 Close the display and turn the computer over.
8 Replace the four screws (M2x3) that secure the computer base to the palm-rest
assembly.
9 Replace the 19 screws (M2.5x6) that secure the computer base to the palm-rest
assembly.
10 Slide the keyboard cable into the connector on the system board and close the
latch to secure the cable.
11 Adhere the tape that secures the keyboard cable to the system board.
12 Slide the touchpad cable into the connector on the system board and close the
latch to secure the cable.
13 Slide the keyboard-backlight cable into the connector on the system board and
close the latch to secure the cable.
14 Slide the power-button board cable into the connector on the system board and
close the latch to secure the cable.
15 Adhere the display cable to the computer base and route the display cable
through the routing guides on the computer base.
16 Connect the display-cable to the system board.
50
computer. After working inside your computer, follow
After working inside your
board.
port.
board.
computer. For more safety best
www.dell.com/
Before