Removing the fingerprint-reader
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
rear
4
Remove the
computer
Procedure
1
Remove the two screws (M2x2) that secure the fingerprint-reader board
bracket to the palm-rest assembly.
2
Lift the fingerprint-reader board bracket off the palm-rest assembly.
80
computer. After working inside your computer, follow
After working inside your
cover.
cover.
base.
computer. For more safety best
www.dell.com/
Before