Quick Vpn - D-Link DIR-895L User Manual

Section 4 - Configuration - Router Mode
This page will help you configure the Quick VPN feature of your router. For more information
refer to Quick VPN on page 170. Before proceeding, ensure that your Internet connection
is working properly. We recommend configuring Dynamic DNS before proceeding with
Quick VPN setup. If your router is assigned an IP address from your ISP using DHCP, it may
frequently change, requiring clients credentials to be set up again and a simple DDNS address
will be easier than an IP address.
Configure the following options:
L2TP over IPSec: Enable or disable the Quick VPN server.
If you enable Quick VPN, the following options are available:
Username: . Enter a username between 1 and 15 characters
Password: Enter a password between 1 and 15 characters.
PSK: Enter a passkey between 6 and 64 characters.
Save For Apple iOS devices and OS X: From a computer browser click
Configuration To this button to export a profile to simplify setup. E-mail this file as an
Local Hard Drive:
attachment to your Apple mobile device or open the file in OS X.
Authentication Choose the authentication protocol type: MSCHAPv2, PAP, or CHAP.
Protocol: MSCHAPv2 is the default.
MPPE: Select the encryption cipher strength: none, RC4-40, or RC4-128.
RC4-128 is the default.
Click Save when you are done.
D-Link DIR-895L User Manual

Quick VPN

Home Settings
DIR-895L HW:A1 FW:1.12
Quick VPN
Quickly and easily create a profile for secure remote access to a Local Area Network (LAN). This profile can
be used to configure other devices to connect to your LAN via a secure VPN tunnel.
Features >> Quick VPN
General
L2TP over IPsec: Enabled
Username: VPN_Username
Password: A_Str0nG_P@ssW0rd!%!
PSK: A_Str0nG_P@ssK3y!%!
Save
Save Configuration To Local Hard Drive:
Advanced
Username: MSCHAPv2
MPPE: RC4-128
COPYRIGHT © 2016 D-Link
Features Management
Save
Advanced Settings ...
⌵
⌵
92