DSC T-LINK TL250 Installation Manual page 25

NOTE: This option can only be programmed With T-Link Console software.
[033] Trouble Toggle Option Section 1
Option [033] and [034] are for the trouble reporting toggles. To enable, set the specific trouble
toggle option ON. To disable, set toggle to option OFF.
Toggle
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
*Must be ON for UL/ULC installations
[034] Trouble Toggle Option Section 2
Toggle
[1]
[2]
[3]
[4]
[5]
[6]-[8]
Default
ON | _ ___________|
ON | _ ___________|
ON | _ ___________|
ON | _ ___________|
OFF | _ ___________|
*OFF | _ ___________|
*OFF | _ ___________|
*OFF | _ ___________|
Default
OFF
| _ ___________|
OFF
| _ ___________|
OFF
| _ ___________|
OFF
| _ ___________|
OFF
| _ ___________|
| _ ___________|
Description
Network Trouble
Invalid Account (set as FFFFFF)
Receiver 1 Absent
Panel Communication Trouble
Input Alarm
FTC to Receiver 1
PC5108 Absent
PC5108 Tamper
Description
FTC to Receiver 2
Keyswitch Arm/Disarm Reporting
T-Link Remote Programming
T-Link Local Programming
Receiver 2 Absent
For Future Use
21