Power on/off
Once power is connected, press the
the transceiver on. Three ascending tones will sound,
indicating that the transceiver has correctly powered
on. Hold the
transceiver off.
Turn Volume
Press "VOL+" to raise the volume. Press "VOL-" to
lower the volume. Hold the key to go fast. The volume
is adjusted in 15 steps from 0 (lowest) to 15 (highest).
The default setting is 4.
Select Channel
You can select an operating channel in one of several
ways:
1) Use the programming software to store operating
channels ahead of time. You can then access them
directly in MR mode, using the channel up/down
buttons or the numeric keypad on the microphone.
2) Input frequency values by using the numeric
keypad in VFO mode.
3) Press the "CHA+" or "CHA-" key to select the
Basic Operation
key for 2 seconds to turn the
13
button to turn