Remove the full-length PCI-X riser board from the riser board assembly.
8.
To replace the component, reverse the removal procedure.
Cache module
To remove the component:
Power down the server (on page 25).
1.
Extend the server from the rack (on page 26).
2.
Remove the access panel
3.
If installed, remove the BBWC battery pack or the FBWC capacitor pack
4.
FBWC capacitor
Remove the air baffle
5.
Remove the PCI riser board assembly
6.
Remove the cache module.
7.
To replace the component, reverse the removal procedure.
("Access
panel" on page 28).
pack" on page 37).
("Air
baffle" on page 38).
("PCI riser board
("BBWC battery pack or
assembly" on page 38).
Removal and replacement procedures 41