Hp Trusted Platform Module - HP ProLiant DL360 G7 Maintenance And Service Manual

Install the air baffle
12.
If removed, install the BBWC battery pack or the FBWC capacitor pack
13.
FBWC capacitor
Install the access panel
14.
Slide the server into the rack.
15.
Power up the server.
16.
After you replace the system board, you must re-enter the server serial number and the product ID.
During the server startup sequence, press the F9 key to access RBSU.
1.
Select the Advanced Options menu.
2.
Select Service Options.
3.
Select Serial Number. The following warnings appear:
4.
WARNING! WARNING! WARNING! The serial number is loaded into the system
during the manufacturing process and should NOT be modified. This option
should only be used by qualified service personnel. This value should
always match the serial number sticker located on the chassis.
Warning: The serial number should ONLY be modified by qualified
personnel. This value should always match the serial number located on
the chassis.
Press the Enter key to clear the warning.
5.
Enter the serial number and press the Enter key.
6.
Select Product ID. The following warning appears:
7.
Warning: The Product ID should ONLY be modified by qualified personnel.
This value should always match the Product ID on the chassis.
Enter the product ID and press the Enter key.
8.
Press the Esc key to close the menu.
9.
Press the Esc key to exit RBSU.
10.
Press the F10 key to confirm exiting RBSU. The server automatically reboots.
11.

HP Trusted Platform Module

The TPM is not a customer-removable part.
CAUTION:
disfigures the TPM security rivet. Upon locating a broken or disfigured rivet on an installed
TPM, administrators should consider the system compromised and take appropriate measures
to ensure the integrity of the system data.
If you suspect a TPM board failure, leave the TPM installed and remove the system board
on page 52). Contact an HP authorized service provider for a replacement system board and TPM board.
("Air baffle" on page 38).
pack" on page 37).
("Access panel" on page 28).
Any attempt to remove an installed TPM from the system board breaks or
("BBWC battery pack or
("System
Removal and replacement procedures 57
board"