Remove the hard drive cage.
4.
To replace the component, reverse the removal procedure.
DVD tray
To remove the component:
Power down the server (on page 25).
1.
Extend the server from the rack (on page 26).
2.
Remove the access panel
3.
If installed, remove the BBWC battery pack or the FBWC capacitor pack
4.
FBWC capacitor
Remove the air baffle
5.
Disconnect the SATA DVD cable from the rear of the DVD tray
6.
cabling" on page 60).
("Access
panel" on page 28).
pack" on page 37).
("Air
baffle" on page 38).
("BBWC battery pack or
("DVD-ROM and DVD-RW drive
Removal and replacement procedures 33