Table of Contents
Advertisement
Figure 63. Installing the hard disk drive into the bracket
6. Slide the bracket with the new hard disk drive into the front-access storage enclosure until it snaps into
position. Press the notch to secure the enclosure cover and lock the enclosure cover with the key.
Figure 64. Installing the hard-disk-drive bracket
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 166.
Device in the Multi-drive Conversion Kit
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
The Multi-drive Conversion Kit (hereafter referred to as kit) might be equipped with either one or both
of the following components:
• Slim optical drive
• Internal storage drive (such as hard disk drive, solid-state drive, or hybrid drive)
Slim optical drive
To install or replace a slim optical drive in the kit, do the following:
.
Chapter 9
Hardware installation and replacement
121
Advertisement
Table of Contents
