Device in the multi-drive conversion kit
Prerequisite
Before you start, read Appendix B "Important safety information" on page 83 and print the following
instructions.
The multi-drive conversion kit (hereafter referred to as kit) might be equipped with either one or both of the
following components:
• Slim optical drive
• Storage drive
Slim optical drive
1. Remove the computer cover. See "Computer cover" on page 26.
2. Ensure that all the cables are disconnected from the kit. Remove the kit from the front of the computer.
3. Remove the slim optical drive with the bracket from the kit.
4. Remove the bracket from the slim optical drive.
5. Install the bracket to the new slim optical drive.
.
Chapter 6
CRU replacement
37