Table of Contents
Advertisement
Always install the memory modules in the alphabetic order as shown.
Figure 26. Memory module installation–order
To install or replace a memory module, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 91.
2. Lay the computer on its side for easier access to the system board.
3. Locate the memory slots. See "Parts on the system board" on page 34.
4. Remove any parts that might prevent your access to the memory slots. Depending on your computer
model, you might need to remove the PCIe x16 graphics card for easier access to the memory slots.
See "PCIe card" on page 96.
5. Depending on whether you are installing or replacing a memory module, do one of the following:
102
P320 Hardware Maintenance Manual
Advertisement
Table of Contents
