Table of Contents
Advertisement
3. If you are installing a new slim optical drive, press the two metal clips
the two screws as shown. Remove the two screws and then go to step 4.
Figure 36. Removing the plastic clip with the two screws
If you are replacing an old slim optical drive, do the following:
a. Press the button as shown to remove the slim optical drive from the flex module.
Figure 37. Removing the slim optical drive from the flex module
b. Remove the two screws that secure the clip to remove the plastic clip from the rear of the slim
optical drive.
Figure 38. Removing the plastic clip from the slim optical drive
108
P320 Hardware Maintenance Manual
1
to remove the plastic clip with
Advertisement
Table of Contents
