Onboard M.2 Solid-State Drive And Its Heatsink Kit - Lenovo ThinkStation PX User Manual

Onboard M.2 solid-state drive and its heatsink kit

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data. When handling the internal storage drive, observe the following guidelines:
• Replace the internal storage drive only for repair. The internal storage drive is not designed for frequent
changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged.
• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
For access, do the following:
1. Remove the left side cover. See "Left side cover" on page 39.
2. Remove the CPU duct. See "CPU duct" on page 42.
3. Remove the front fan assembly. See "Front fan assembly" on page 43.
4. Remove the front fan bracket. See "Front fan bracket" on page 44.
Removal steps
Remove the onboard M.2 solid-state drive.
70
PX User Guide