Table of Contents
Advertisement
4. To install a new card reader into the card-reader retaining bracket, align the four holes in the card
reader with the corresponding studs on the bracket. Press the new card reader downward until
it snaps into position.
Figure 49. Installing the card reader into the card-reader retaining bracket
5. Note the orientation of the new card reader and route the card reader cable into the cable clip. Hold
the clip on the card-reader retaining bracket to insert the new card reader into the card-reader slot in
the flex module. Ensure that the card reader snaps into position.
Figure 50. Installing the card reader in the flex module
114
P320 Hardware Maintenance Manual
Advertisement
Table of Contents
