Switching On The Safety Lock - Baumatic OMBRA2BL User Manual

o Certain types of cookware may result in a noise being made
when being used on an induction zone hob. This does not mean
that there is an appliance fault.
o IMPORTANT: You should make sure that all pans are placed in
the centre of the induction zone that you are using.

Switching on the safety lock

It is possible to lock the hob top, so that none of the cooking zones
can be switched on.
o Switch on the hob using the ON/OFF button (1).
o The whole hob top can be locked by pressing the
safety lock button for a few seconds (2) whilst the
appliance is switched on.
o A neon next to the safety lock button will light to
confirm that the safety lock feature has been
switched on.
o When the safety lock feature is activated, it will disable any of
the other buttons on the control panel, except the ON/OFF
button.
o To disable the safety lock feature, you should press the safety
lock button again for a few seconds, until the neon next to the
button goes out.
o You will then be able to adjust the power of any zone on the hob
top.
o IMPORTANT: If the appliance is switched off whilst the safety
lock feature is activated, then it may still be activated the next
time that you switch the appliance on. Therefore before you can
switch on a zone and set it to a power level, you will need to
deactivate the safety lock by pressing the safety lock button.
20