o Place a fixing bracket over the hole in each corner of the
underneath of the hob. Then place a screw through the hole and
fixing bracket. Tighten the screws partially, so that the fixing
brackets stay in place. IMPORTANT: Do not tighten the screws
fully.
o Carefully turn the hob back over
and then gently lower it into the
aperture hole that you have cut out.
o On the underneath of the hob,
locate the fixing brackets and turn
them so that they locate on the
underneath of the worktop and the
hob.
o Fully tighten the screws to secure
the hob into position.
29