My Appliance Isn't Working Correctly - Baumatic OMBRA2BL User Manual

My appliance isn't working correctly

o The cooking zones are not functioning or will not switch
on.
* It has been more than two minutes since the appliance was
switched on. You should switch the appliance on again, using the
ON/OFF button.
* You have not placed an appropriate pan on the zone that you are
trying to get to heat.
* The safety lock has been switched on (see the "Switching on the
safety lock" section for information on how to turn off the safety
lock).
* Several touch control buttons have been pressed at once. You
should only touch one touch control button at a time.
* The safety cut out has been triggered. Press the ON/OFF button
(1) to reset the appliance.
* Check that the mains electrical supply to the appliance is correct
and working. Check the mains fuse.
o The residual heat indicator has not come on after I have
switched a cooking zone off.
* The cooking zone has only been turned on for a short period of
time; therefore it did not go above 60°C.
* IMPORTANT: If the cooking zone does appear to be hotter than
60°C and the residual heat indicator has not come on, you
should call the Customer Care Department.
o A humming sound is heard when a cooking zone is
selected.
* This is normal; the sound will disappear when the zone heats up.
o The cooking zones have become discoloured.
* This maybe caused by burnt on remnants of food. This will not
affect the working of the appliance. However you should make
sure that the cleaning instructions are being followed regularly.
33