Baumatic OMBRA2BL User Manual page 28

o Carefully turn the hob upside down and place it on a cushioned
mat.
o Apply the sealing strip provided around the edge of the
appliance.
o The protective covering must be removed from both sides.
o Do not leave a gap in the sealing agent or overlap the thickness.
o IMPORTANT: Do not use a silicon sealant to seal the appliance
against the cut-out. This will make it difficult to remove the hob
from the aperture in future, particularly if it needs to be
serviced.
o Use the fixing bracket that is appropriate for your thickness of
worktop.
o Fixing bracket
o Screw
28