o There must be a gap of at least 17 mm between the underneath
of the appliance and the top of the oven.
o You must make sure that there is a 5mm gap below the
underneath of the worktop at the front edge of the hob.
Unpacking the appliance
When unpacking the appliance please check that the following items
are contained within the packaging:
1 Baumatic hob
1 Ceramic hob scraper
1 Installation and instruction manual
1 Baumatic guarantee card
4 Fixing brackets
4 Fixing screws
1 Sealing strip
Installing the appliance
o Cut a hole in the worktop that corresponds with the drawing
shown above.
o IMPORTANT: You must have a gap of at least 17 mm between
the underneath of the appliance and any surface that is below it.
27