Residual Heat Indicator; Switching On The Safety Lock - Baumatic BF17 User Manual

Residual heat indicator

o When a zone is switched off, a few seconds later
o If no other zones are switched on, then 0 will alternate with the
letter H in the cooking zone indicator (4).
o If another zone is in use, then a fixed letter "H" will appear in
the cooking zone indicator (4).
o If you switch off the appliance using the ON/OFF button (1) then
the "H" will still appear on the cooking zone indicator (4).
o When the temperature falls below 60°C, then the letter "H" will
disappear. If other zones of the hob are still on, then "0" will
appear on the cooking zone indicator (4).

Switching on the safety lock

It is possible to lock the hob top, so that none of the cooking zones
can be switched on.
o Switch on the hob using the ON/OFF button (1).
o IMPORTANT: It is not possible to lock the hob top if any of the
cooking zones are in use. The following steps should be followed
as soon as the hob is switched on.
o Press the front right hob zone plus button (2) and the minus
button (3) simultaneously. Then release these two buttons and
immediately press the front right hob zone plus button again.
o An "L" will appear on all of the cooking zone indicators (4).
o If any of the zones are still above 60°C from earlier use then the
letter "L" will alternate with the letter "H".
o When the safety lock feature is activated, it will disable any of
the other buttons on the control panel, except the ON/OFF
button (1).
o If you turn off the appliance off whilst the safety lock is
activated, the next time you turn the hob on, and the safety lock
will still be engaged.
the corresponding cooking zone indicator (4) will
show the letter "H". This means that the
temperature of the zone is over 60°C and is
therefore high enough to cause injury.
14