Front Speakers - HP Envy 13 Maintenance And Service Manual

Front speakers

Description
For use only on computer models equipped with a graphics subsystem with discrete memory
For use only on computer models equipped with a graphics subsystem with UMA memory
Before removing the front speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Disconnect the battery cable from the system board (see
Remove the front speakers:
1. Disconnect the front speaker cable (1) from the system board.
2. Release the tape (2) that secures the front speaker cable to the battery.
3. Remove the front speakers (3).
Reverse this procedure to install the front speakers.
Spare part number
928527-001
928528-001
Battery on page 33).
Component replacement procedures 37