Touchpad - HP Envy 13 Maintenance And Service Manual

TouchPad

NOTE: The TouchPad spare part kit does not include the TouchPad bracket or TouchPad cable. The TouchPad
bracket is available using spare part number 928466-001. The TouchPad cable is available using spare part
numbers 928451-001 (for use only on computer models equipped with a graphics subsystem with discrete
memory) and 928452-001 (for use only on computer models equipped with a graphics subsystem with UMA
memory).
Description
ClickPad in natural silver finish
ClickPad in silk gold finish
SecurePad in natural silver finish
SecurePad in silk gold finish
Before removing the TouchPad, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the TouchPad:
1. Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect the TouchPad
cable from the system board.
2. Release the piece of tape (2) that secures the TouchPad cable to the keyboard/top cover.
3. Release the piece of tape (3) that secures the TouchPad to the keyboard/top cover.
4. Remove the five Phillips PM2.0×2.3 broad head screws (4) that secure the TouchPad to the keyboard/top
cover.
5. Remove the TouchPad bracket (5) .
Bottom cover on page
Battery on page 33).
30).
Component replacement procedures
Spare part number
928488-001
928487-001
928490-001
928489-001
45