HP Envy 13 Maintenance And Service Manual page 51

9. Remove the left I/O bracket (4).
The left I/O bracket is available using spare part number 928467-001.
10. Remove the four Phillips PM2.5×5.7 screws (1) that secure the display assembly to the keyboard/top
cover.
11. Lift the front edge of the keyboard/top cover (2) until it rests at an angle.
12. Slide the keyboard/top cover (3) up and away at an angle and separate it from the display assembly.
Reverse this procedure to install the display assembly.
Component replacement procedures 43