Speakers (Front) - HP ENVY Maintenance And Service Manual

Speakers (front)

Description
Speaker Kit
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the hard drive (see
Remove the speakers:
1. Remove the two broadhead Phillips PM2.0×2.0 screws (1) that secure the speaker to the computer.
NOTE:
performance of the speakers.
2. Remove the speaker cable from its routing path (3).
3. Remove the speaker (4).
4. Disconnect the speaker cable (1) from the system board.
Bottom cover on page
Battery on page
Hard drive on page
The speaker includes rubber isolators (2) around the screws. These isolators are crucial to the
35).
54).
55).
Component replacement procedures
Spare part number
812705-001
57