Speakers (Front) - HP ENVY 17-n100 Maintenance And Service Manual

Speakers (front)

Description
Speaker Kit
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
Remove the speakers:
1. Disconnect the speaker cable (1).
2. Remove the three broadhead Phillips PM2.0×2.0 screws (2) that secure the speaker to the computer.
NOTE:
performance of the speakers.
3. Remove the speaker (3).
Reverse this procedure to install the speakers.
Battery on page
Optical drive on page
Bottom cover on page
The speaker includes rubber isolators (4) around the screws. These isolators are crucial to the
27).
28).
31).
Component replacement procedures
Spare part number
813805-001
47