Left side
Component
(1)
(2)
(3)
(4)
6
Chapter 2 Getting to know your computer
USB 3.x SuperSpeed port
Audio-out (headphone)/Audio-in
(microphone) combo jack
USB Type-C port with HP Sleep and Charge
MicroSD memory card reader
Description
Connects a USB device, such as a cell phone, camera, activity
tracker, or smartwatch, and provides high-speed data transfer.
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable. Also connects an
optional headset microphone. This jack does not support optional
standalone microphones.
WARNING!
To reduce the risk of personal injury, adjust the
volume before putting on headphones, earbuds, or a headset. For
additional safety information, refer to the Regulatory, Safety, and
Environmental Notices.
To access this guide:
Select the Start button, select HP Help and Support, and
▲
then select HP Documentation.
NOTE:
When a device is connected to the jack, the computer
speakers are disabled.
Connects a USB device that has a Type-C connector, provides data
transfer, and even when the computer is off, charges most
products such as a cell phone, camera, activity tracker, or
smartwatch.
– and –
Connects a display device that has a USB Type-C connector,
providing DisplayPort output.
NOTE:
Cables and/or adapters (purchased separately) may be
required.
Reads optional memory cards that enable you to store, manage,
share, or access information.
To insert a card:
1.
Hold the card label-side up, with connectors facing the
computer.
2.
Insert the card into the memory card reader, and then press
in on the card until it is firmly seated.
To remove a card:
Press in on the card, and then remove it from the memory
▲
card reader.