Page 1
All personnel shall carefully read, understand and follow all safety rules, operating instructions, and the Scaffold Industry Association’s MANUAL OF RESPONSIBILITIES of ANSI A92.6-1999 before performing maintenance on or operating any UpRight Aerial Work Platform. OCAL ISTRIBUTOR TEL: (1) 800-926-5438 or (1) 559-662-3900...
Page 2
Serial Number 20000 – Current When contacting UpRight for service or parts information, be sure to include the MODEL and SERIAL NUMBERS from the equipment nameplate. Should the nameplate be missing, the SERIAL NUMBER is also stamped on top of the chassis above the front axle pivot.
Page 3
Rotary Drive/Lift Switch, and Red Mushroom Emergency Stop Switch Mushroom Emergency Stop Switch • NEVER use damaged equipment. (Contact UpRight for instructions. See toll free phone number on inside back cover.) Drive System Dual Front Wheel Hydraulic Motors Dual Front Wheel Hydraulic Motors •...
These labels shall be present and in good condition before operating the machine. Be sure to read, under- This manual covers the application of the MX15 and MX19 Aerial Work Platforms. This manual must be stand and follow these labels when operating the machine.
Battery fluid is highly corrosive. Thoroughly rinse away any spilled fluid with clean water. 2. Check the level of the hydrau- Always replace batteries with UpRight batteries or manufacturer approved replacements weighing lic fluid with the platform fully 26,3 kg (58 Lbs.) each.
19. Push the Platform Emergency Stop Switch to check for proper operation. All machine functions should be disabled. Pull out the Platform Emergency Stop Switch to resume. Page 6 060570-008 MX15 / MX19 - Operator Manual 060570-008 MX15 / MX19 - Operator Manual Page 11...
2. Check that the route is level, and is capable of support- Both the MX15 and MX19 may be forklifted from the rear end of the machine between the wheels.They ing the wheel loads.
2. Park the machine on a firm level surface, preferably under cover, secure against vandals, children and unauthorized operation. 3. Turn the Chassis Key Switch to OFF and remove the key to prevent unauthorized operation. Page 8 060570-008 MX15 / MX19 - Operator Manual 060570-008 MX15 / MX19 - Operator Manual Page 9...