Step Eight - Secure Cover And Power Up - Tesla Wall Connector Installation Manual

Step Eight - Secure Cover and Power Up

1 Reposition the front cover over the unit,
aligning the five tabs on the back of the
front cover with their corresponding slots.
Starting at the bottom and working
upwards, press firmly on both sides of the
front cover until it clicks into place.
2 Using a T20 torx driver, re-attach the two
security screws that you removed from the
bottom of the Wall Connector in "Step
Two - Install Wall Bracket" on page 11.
3 Turn on the power.
4 Attempt to charge the car to ensure the
Wall Connector is operating correctly and
charging at the selected operating current.
For instructions on how to charge, refer to
the owner information provided with your
vehicle.
NORTH AMERICA 17