Advertisement
Step 4
You will need:
4 x Washers
(H1)
4 x Short bolts
(H3)
Note:To make it is easier,
place the seat over a table.
Insert Front Leg (P5a) into Side Apron (P4a) and insert Front Leg (P5b) into Side Apron (P4b).
Ensuring legs fit into Seat Frame (P2). To secure Front Legs to seat frame insert Short Bolts
(H3) through Washers (H1) and tighten to 80%.
Step 5
You will need:
2 x Timber Screws
(H4)
Use 1 x Timber Screw (H4) for each Front
Leg (P5a, P5b) to secure Side Apron(P4a, P4b).
Turn each screw by Phillips Head Screwdriver
until fully tightened.
(H4)
(H1)
(P5)
(H3)
NOTE: LEG GOES
FLUSH INTO CORNER
Page 6
Advertisement
