Stopping The Audible Alarm On The Operation Panel Unit - JRC JCY-1850 Instruction Manual

Case 2: Carrying on the voyage is not possible as the accident is serious...
Step Actions
1 Stop recording data onto the S-VDR
when voyage is stopped by the accident.
2 Stop recording data onto the CF CARD.
3 Take out the CF CARD from RCU.
4 Copy the record data from the CF CARD
to HDD of PC.
Check the copied data.
(Each folder name shows the date and
time when the data was recorded)
5 Return the CF CARD to RCU after
copying
6 Do not restart recording data onto
S-VDR.
Case 3: The danger of life to the crew is pressing as the accident is very serious...
Escape from the vessel first. Leave S-VDR as it is.
2 hours after the main power blackout, S-VDR stops recording data automatically.
The capsule will be collected and the and the record data will be recovered
therewith.
ATTENTION
To copy data from a CF CARD, a PC with PCMCIA slot is needed. If the PC
in the ship is not the case, contact us. A standard laptop PC has a PCMCIA
slot.
Reference)
The operation of the REC STOP SWITCH and the CARD STOP SWITCH and the
record media
Switch
REC STOP
CARD STOP

1.4.5 Stopping the Audible Alarm on the Operation Panel Unit

In case the ALARM BUZZER on the Operation Panel Unit sounds:
1) Press the ACK SWITCH on the Operation Panel Unit.
2) Then the ALARM BUZZER on the Operation Panel Unit stops.
3) If more than one alarm are detected, press the ACK SWITCH as many times as the
Record onto capsule
Stop to record
Continue to record
9
Operation of RCU
Press the REC STOP SWITCH.
Make sure that the REC LED is
turned off.
Press the CARD STOP SWITCH.
Make sure that the CARD LED is
turned off.
Press the CARD EJECT BUTTON.
Make sure that the CARD LED
lights up.
Record onto CF CARD
Stop to record
Stop to record
1. Operation
Ref.
Section
1.4.1
Section
1.4.3
Section
1.4.3
Section
1.4.3
Section
1.4.3
Take out CF CARD
Impossible
Possible