JRC JCY-1850 Instruction Manual page 31

1.5.3.2 How to operate the Data Processor Unit
1. To stop the recording of data into the Protective Capsule Unit
ATTENTION
Do not halt the recording of data onto the Protective Capsule Unit while
the ship is navigating. Otherwise no data would be recorded, even in
case of an accident.
1) Press the REC STOP SWITCH on the Main Control Board.
2) The REC LED on the Main Control Board blinks.
3) After about a minute, the blinking REC LED on the Main Control Board and
RECORDING LED on the Operation Panel Unit are turned off and the recording of
the data into the Protective Capsule Unit stops.
4) When the Recording Control Unit stops recording to the Protective Capsule Unit,
the Recording Alarm is generated. (Error code: 22__)
2. To restart the recording of data into the Protective Capsule Unit
1) Press the REC START SWITCH on the Main Control Board.
2) The REC LED on the Main Control Board lights up.
3) The RECORDING LED on the Operation Panel Unit lights, and the recording of the
data into the Protective capsule Unit starts.
4) When the Recording Control Unit restarts recording to the Protective Capsule Unit,
the Recording alarm stops.
3. To back up the data stored in the CF CARD
ATTENTION
Do not remove the CF CARD while the CARD LED on the Main Control
Board is on. It could damage the CF CARD. Make sure that CARD LED is
off.
1) Make sure that the CARD LED on the Main Control Board is on.
2) Press the CARD STOP SWITCH on the Main Control Board.
3) The CARD LED on the Main Control Board blinks for about 5 seconds.
4) Make sure that the CARD LED on the Main Control Board is turned off. And press
the CF CARD EJECT BUTTON.
5) Take out the CF CARD. Insert the CF CARD with a CARD ADAPTER into the PC
that has a PCMCIA slot and copy the data into the PC.
6) After the copy has been finished, insert the CF CARD into the CARD slot on the
Main Control Board. (Be sure that the CF CARD JRC-label side is pointing right.)
7) Make sure that the CARD LED lights up.
8) Then the recording of data into the CF CARD starts automatically.
17
1. Operation