JRC JCY-1850 Instruction Manual page 38

1. Operation
Table 8: ERROR code table of the Operation Panel Unit (3/3)
ALARM DETAIL
SYSYTEM CODE
7 0
7 1
7 2
7 3
7 4
7 5
7 6
CATEGORY
FGB CH1 Radar image data error
The FGB does not receive RGB signals from Radar connected
to CH1.
CH2 Radar image data error
The FGB does not receive RGB signals from Radar
connected to CH2.
FGB Communication error
The MCB does not communicate with the FGB normally via
LAN.
FGB Setup data reception error
The MCB does not receive the setup data of FGB successfully.
FGB Control error
The MCB did not communicate with FGB successfully.
FAN alarm of NWP-46
FAN built in NWP-46 (Radar Interface Unit) is out of order.
FGB Real time monitor data transmission error
The IP address for transmitting image data is not registered in
the FGB yet.
CONTENTS
24