Changing the SBG901 Default Password
Do the following to change the default password:
1. On the SBG901 Status page, click the Security submenu option.
2. In the Password Change Username field, type your new User Name.
3. In the New Password field, type your new password (this field is case sensitive).
4. In the Re-Enter New Password field, type your new password again (this field is case
sensitive).
5. In the Current Username Password field, type your old password.
6. Click Apply to save your changes.
Restore Factory Defaults
To reset the user name and password back to the original factory settings:
1. Select Yes, and then click Apply.
2. You must login with the default user name, admin, and password, motorola, after applying
this change. All entries are case-sensitive.
3 Basic Configuration
This document is uncontrolled pending incorporation in PDM
43