Verifying the IP Address in Windows Vista
Do the following to verify the IP address:
1. On the Windows Vista desktop, click Start.
2. Click All Programs.
3. Click Accessories.
4. Click Run to display the Run window.
5. Type cmd and click OK to open a command prompt window.
6. Type ipconfig and press Enter to display the IP Configuration.
A display similar to the following indicates a normal configuration.
If an Autoconfiguration IP Address is displayed, there is an incorrect connection between the PC
and the SBG901, or there are broadband network problems.
Renewing Your IP Address
To renew your IP address in Windows 2000, Windows XP , or Windows Vista:
1. On the Windows Desktop, click Start.
2. Select Run. The Run window is displayed.
3. Type cmd and click OK.
4. Type ipconfig /renew and press ENTER. If a valid IP address is displayed as shown,
Internet access should be available.
2 Getting Started
This document is uncontrolled pending incorporation in PDM
Figure 22 IPCONFIG window for Windows Vista
35