10. Slide the SBG901 down until it stops against the top of the keyhole opening.
After mounting, reconnect the coaxial cable input and Ethernet connection. Plug the power cord
into the +12VDC connector on the cable modem and the electrical outlet. Route the cables so
that they are not a safety problem.
Wall Mounting Template
You can print the following page to use as a wall mounting template.
Be sure you print it at 100% scale. In the Print dialogue window, be sure that Scale to paper size
is set to No scaling in the Print dialog box.
Measure the printed template with a ruler to ensure that it is the correct size.
2 Getting Started
This document is uncontrolled pending incorporation in PDM
38