Emerson Rosemount Ultrasonic 3107 Quick Start Manual page 15

July 2016
Field Communicator or AMS
To change the tank shape / non linear profile:
1. From the Home screen, select
2. Select
2: Manual Setup
3. Select
3: Profiling
4. Select
2: Set Non-Linear Profile
5. Select a new profile, and then press "
to save the selection.
6. Press "
SEND
7. The selected profile can be viewed at
Fast Key sequence 2, 2, 3, 3.
Note
When on-screen messages appear, take action if needed and press "

Rosemount 3490 Series Control Unit
To change the tank shape / non linear profile:
1. From the Main Menu screen, select
2. Select the transmitter (e.g. "
3. Select
DUTY
4. Follow the on-screen instructions to select
and save the new setting.
2: Configure
.
.
.
" to update the transmitter.
Tx1: 3107
, and then select
Tank Shape
Select Non-Linear Profile: (Linear)
Linear
Linear
.
Special Plotted
Horizontal Cylinder Flat
Spherical
Horizontal Cylinder Domed
Flume/weir (3/2)
V notch (5/2)
"
Enter
(Field Communicator screen)
Tank Shape
.
SETUP
Esc=Quit
").
(Rosemount 3491 screen)
.
Quick Start Guide
ABORT ENTER
".
OK
P011
Linear
=Edit
15