Ieee Common Commands - Tektronix RSA5100A Series Programming Manual

IEEE Common Commands

IEEE Common Commands
2-12
The IEEE 488.2 common commands have a "*" prefix.
Table 2-9: Status and error commands
Header
*CAL
*CLS
*ESE
*ESR?
*IDN?
*OPC
*OPT?
*RST
*SRE
*STB?
*TRG
*WAI
RSA6100A Series & RSA5100A Series Programmer Manual
Description
Performs an internal self-calibration.
Clears status.
Sets or queries the bits in the ESER register.
Returns the contents of the SESR register.
Returns the instrument identification code.
Synchronizes commands.
Returns a list of options installed in your analyzer.
Returns the instrument settings to the factory defaults.
Sets or queries the bits in the SRER register.
Returns the contents of the SBR using the MSS bit.
Generates a trigger.
Prevents the analyzer from executing further commands.