Elcometer 204 User Manual page 10

10 SPARES & ACCESSORIES (continued)
Part Number
TXC5M00BP-4
TXC5M00EP-3
TXC5M00EP-4
TXC5M00CP-4
TXC5M00CP-6
#
TXC5M00CP-8
TXC7M50BP-3
‡
TXC7M50CP-4
TXC7M50CP-5
TXC10M0BP-1
TXC10M0CP-4
#
High temperature transducer, suitable for measuring hot surfaces up to 343°C (650°F).
‡
Extra resolution transducer with increased near surface resolution, ideal for use on thin substrates.
Other transducers are available which can be connected to the gauge
using a transducer adaptor - see Section 10.4 'Transducer Adaptor' on
page en-11. For a complete list of transducers, visit
elcometerndt.com.
10.2 CALIBRATION STANDARDS
Available as a set or individually, allowing
users to select the most appropriate
thicknesses for their application, Elcometer
calibration standards are manufactured
from 4340 steel to a tolerance of ±0.1% of
the nominal thickness.
Calibration standard sets and individual standards are supplied
complete with calibration certificate.
b
Calibration standards manufactured in other materials are available on request. Contact Elcometer for
further information.
en-9
R
TABLE 1: TRANSDUCERS
Frequency
b
5.0MHz
5.0MHz
5.0MHz
5.0MHz
5.0MHz
5.0MHz
7.5MHz
7.5MHz
7.5MHz
10.0MHz
10.0MHz
Diameter
3/16"
1/2"
1/2"
1/4"
1/4"
1/4"
3/16"
1/4"
1/4"
3/16"
1/4"
www.elcometer.com