Divus TOUCHZONE TZ07 User Manual page 62

DIVUS TOUCHZONE .
62
By default, every action is disabled and has to be activated manually before it can be used/configured. Disabled
actions will not show up in the dialog to select the action to execute, even though fully configured.
Enabling an action will also enable to configure it. For every action, you can select an icon from a given set, the
name for the action and the duration in milliseconds. Next, you can select the type of the action (KNX or digital
output) and depending on your selection you will have to either configured IP and ID for the KNX action, or select
the digital output.
Next, the camera configuration is discussed.
In the camera configuration you can see a list of currently configured cameras. The order here is important, as
this order will also be used when displaying the cameras. You can change the order of each camera with the far
right up/down arrow. By clicking on the trashcan the corresponding camera can be deleted. With the top right
screen to configure a new camera, which will be added at the end of the list. With
the gearwheel button you can open the same screen to edit a camera, in this case the fields will be filled with the
configuration of the corresponding camera.