Divus TOUCHZONE TZ07 User Manual page 27

The next 2 settings refer to the control of the RGB-LED of DIVUS TZ. The first option permits to use the blue LED
as orientation LED. When the checkbox is enabled, the LED will be continuously on and can be seen as operating
LED or as orientation LED by night.
The second option instead handles the control of the red LED and uses it to signal the current network state. If
DIVUS TZ is not connected to a network and the checkbox of this option is enabled, the red LED will be turned
on. As soon as the device connects to
disabling the corresponding checkbox, also this functionality can be disabled.
NEW: The new TOUCHZONE series provides no more opening for the LEDs within the design frame. Nevertheless,
the LEDs will be kept enabled per default, in order to provide visual feedback during the first operation / installation
of the device.
The ne
bottom of the screen. At delivery, the navigation bar is always active, since the contained soft keys could be
necessary when configuring and installing DIVUS TZ. A deactivation of the navigation bar can be useful if a kiosk
-screen visualisation of apps is required.
the colour of the DIVUS logo within the LAUNCHER interface. This option is disabled by default; if enabled, the
following events can be signalled:
-
Logo white:
-
Logo yellow:
-
Logo red:
If more than one event occurs contemporarily (e.g. mute and no network), only the latest event will be signalled
through the logo colour.
In order to return to the main menu, you can either use the BACK key in the navigation bar or you can simply click
menu.
Default, no events occurred
The volume has been either set to 0 or muted
The device has no active network connection
DIVUS TOUCHZONE .
27
-Check
ing
-