Divus TOUCHZONE TZ07 User Manual page 47

Show Toolbar
Show top menu
Show side menu
App Autostart
Keep Display On
Enable Auto-Hide
Refresh App
Empty Cache
Password Protection
changed within the settings menu, the connection will be refreshed automatically.
NOTE: Since the switching between local and remote access is not required when using the app on DIVUS TZ (it
will always run in the local network), the corresponding option will be shown only when using the app on mobile
devices.
When starting the app for the first time an advice will be shown that no server has been configured yet. The use
of the app will only be possible if at least the IP address of the targeted KNXCONTROL device is inserted. When
leaving the settings page after modifying this value, the app will try to connect to the specified server. The home
page of the server is shown as soon it is loaded completely.
The first connection can take up to one minute until completion since the necessary data has to be transferred
from the KNXCONTROL device. Once the web app has been loaded completely, the connection to the server
remains established and the pages of the visualisation can be access without further time delay. This is
accomplished by using a background service which keeps active the connection to the server and prevents that
the web app is closed automatically by the garbage collector of Android.
Permits to show / hide the toolbar on the lower edge of the app (with the buttons
HOME, FAVORITES and SETTINGS).
This setting sets the visibility of the top menu inside the OPTIMA visualization.
This settings sets the visibility of the side menu inside the OPTIMA visualization.
If this option is enabled, the app will be automatically started after a reboot of
DIVUS TZ. In this way, after every boot the connection to the server will be
established immediately.
This option defines whether the app should keep the display of DIVUS TZ always
on or instead the energy settings (as defined within the DIVUS LAUNCHER) should
be used.
This option permits to set a timeout after which the app is closed automatically.
This prevents that the app remains permanently in front and hides other
This entry refreshes the interface of the software, without clearing the cache of
the DIVUS TZ (see next point). This process is much faster than the deletion of the
cache and is enough if only small changes to the visualisation occurred.
If this menu entry is clicked, the local cache of DIVUS TZ is emptied / deleted and
at the next connection to the server all necessary data is downloaded again from
the server. This function is necessary whenever changes are made on the server
side (like for example change of the theme, creation of new rooms etc.). In these
cases the cache has to be refreshed before DIVUS TZ will show the new
configurations.
As already mentioned, this point allows defining a password which protects the
access to the settings menu. If this field is left empty, access to the settings is
granted to everybody clicking on the settings button.
DIVUS TOUCHZONE .
47
ave been